Two Port 5.2kW Outdoor Heat Pump

Multi Room System // MXZ-2D52VA-A2

Multi-Split system outdoor unit. (WxDxH, mm): 800 x 285 x 550. Cooling/Heating capacity: 5.2/6.1kW. Weight: 37kg. Liquid / Gas Pipe (OD, mm): 6.35 x2 / 9.52 x2. Either a minimum of 1 or maximum combination 2 indoor units (up to Class 42), with max. class total of 75.

Cooling Capacity5.2 kW
Heating Capacity6.1 kW
Select a Size



With our multi room systems, you have the flexibility to choose the perfect indoor unit for each room. For example, you may want a super quiet, low capacity unit for a smaller bedroom and a stylish, higher capacity unit for the larger living room. And, you are able to connect these to a single outdoor unit, rather than requiring one for each indoor – saving outdoor space.

Energy Saving

Mitsubishi Electric Inverter control distributes tempered air in the shortest period of time and ensures that the system operates at ideal capacity, minimising energy wastage.

Individual Control

All units on our multi room systems allow individual control of air conditioning in each space, allowing the occupier to adjust the temperature to suit their comfort levels and ensure that it is only operating when needed.

Quiet Operation

We have applied a ‘silent mode’ to these multi room units, ensuring that outdoor sound levels remain as low as possible during operation.


· Function: Cooling/Heating · Type: Multi Split, Inverter
· Multi-Split System Compatible: Yes · Number of indoor units: 1 or 2
· Capacity - Cooling: 5.2 kW · Capacity - Heating: 6.1 kW
· Capacity - Cooling (min. - max.): 1.1 - 6.0 kW · Capacity - Heating (min. - max.): 1.0 - 7.0 kW
· Power input - Cooling: 1.40 kW · Power input - Heating: 1.59 kW
· EER / COP: 3.88 / 4.07 · AEER / ACOP: 3.83 / 4.04
· Operation Range - Cooling: -10 / +46 degC · Operation Range - Heating: -15 / +24 degC
· Sound Level - Cooling (dB(A)): 50 · Sound Level - Heating (dB(A)): 53
· Current - Cooling (Rated / Max.): 6.3 / 12.2 A · Current - Heating (Rated / Max.): 7.1 / 12.2 A
· Air volume - Cooling (Litre/sec): 525 · Air volume - Heating (Litre/sec): 532
· Refrigerant: R410A · Liquid pipe size (OD, mm): 6.35 x2
· Gas pipe size (OD, mm): 9.52 x2 · Max. pipe length (m): 30 total / 20 each
· Max. pipe height (m): 15* · Power supply: 230V / Single Phase / 50 Hz
· Dimensions (WxDxH, mm): 800 x 285 x 550 · Weight: 37 kg
· [*1]: If the outdoor is installed higher than the indoor max. height is reduced to 10m.

·  Rating Conditions (AS / NZS 3823):
   Cooling – Indoor: 27°C DB, 19°C WB. Outdoor: 35°C DB.     Heating – Indoor: 20°C DB, Outdoor: 7°C DB, 6°C WB.

·  Sensible Cooling Conditions, Indoor: 27°C DB, 20°C WB. Outdoor: 35°C DB.

·  Dry function will not work when the room temperature is below 13°C.

·  Colour: Heat pump units shown may not be colour accurate, please ensure you view an actual unit for colour matching.

·  Maximum length is inclusive of height differential. i.e. (20m length/12m high) means the pipe can be 12m high and 8m across for a total length of 20m.

·  Measure of Energy Efficency: A calculated measurement of energy efficiency for both heating and cooling using the ratio of kW input to kW output.
   EER = Energy Efficiency Ratio
   COP = Coefficient of Performance
   AEER# = Annual Energy Efficiency Ratio
   ACOP# = Annual Coefficient of Performance
   #These include standby power in the rating calculation

Connectable Indoors

Connect multiple indoor units to a single outdoor unit.

This system gives you the freedom to select the indoor model best suited to each and every room in your home. Multi-Split Systems are designed to allow multiple indoor units of varying capacity and type to be connected to just one outdoor unit, enhancing exterior aesthetics by reducing the number of outdoor units required.

If more than one room requires heating and cooling, a Multi-Split system may be right for you. This system allows the indoor units chosen to reflect the specific needs of each room. For example, a whisper-quiet high wall could be selected for a bedroom, while a floor console could be used to replace a fireplace in the living room. The indoor units selected will be powered by just one outdoor unit, lowering the overall capital cost and increasing the energy efficiencies achieved.

Connectable Indoor Unit Types.

Every home is different, and with so many options to choose from it is important to consider each individual room’s requirements as part of the overall Multi Room system.

Use the following learn more about the different indoor unit types available, as well as controller options. This information can then be used to base your preferred selection of indoor units and control systems that best suit your home.

Multi Room Systems need to be specified by a Mitsubishi Electric Authorised Installer

Final selections should always be based on an in-home quote from a qualified Mitsubishi Electric Authorised Installer.



Classic Multi Series