Four Port 7.1kW Outdoor Heat Pump

Multi Room System // MXZ-4E71VAD2-A1

The four port 7.1kW multi room outdoor unit allows you to connect 2-4 indoor units, up to a Class 60, with a maximum total Class of 125. Choose the indoor unit best suited to each room’s style and size, and keep your home’s exterior looking neat with only one outdoor multi room unit.

Cooling Capacity7.1 kW
Heating Capacity8.0 kW

Features

Specifications

· Function: Cooling/Heating · Type: Multi Split, Inverter
· Multi-Split System Compatible: Yes · Number of indoor units: 2, 3 or 4
· Capacity - Cooling: 7.1 kW · Capacity - Heating: 8.0 kW
· Capacity - Cooling (min. - max.): 3.7 - 8.8 kW · Capacity - Heating (min. - max.): 3.4 - 10.7 kW
· Power Input - Cooling: 1.88 kW · Power Input - Heating: 1.84 kW
· EER / COP: 3.78 / 4.35 · AEER / ACOP: 3.51 / 4.06
· Operation Range - Cooling: -10 / +46 degC · Operation Range - Heating: -15 / +24 degC
· Sound Level - Cooling (dB(A)): 50 · Sound Level - Heating (dB(A)): 54
· Current - Cooling (Rated): 8.3 A · Current - Heating (Rated): 8.1 A
· Air Volume - Cooling (Litre/sec): 633 · Air Volume - Heating (Litre/sec): 757
· Refrigerant: R410A · Liquid Pipe Size (OD, mm): 6.35 x4
· Gas Pipe Size (OD, mm): 9.52 x3 + 12.7 x1 · Max. Pipe Length (m): 60 total / 25 each
· Max. Pipe Height (m): 15 /10* · Power Supply: 230V / Single Phase / 50 Hz
· Dimensions (WxDxH, mm): 840 x 330 x 710 · Weight: 59 kg
· [*1]: If the outdoor is installed higher than the indoor max. height is reduced to 10m.
  • Electrical data is for outdoor unit only.
  • Maximum length is inclusive of height differential.
  • Rating Conditions (AS/NZS 3823):
    COOLING Indoor: 27°C DB, 19°C WB.
    Outdoor: 35°C DB.
    HEATING Indoor: 20°C DB.
    Outdoor: 7°C DB, 6°C WB.
    Refrigerant piping length (one way): 5m
    Running Current and Power Input figures are for outdoor unit only.
  • Measure of Energy Efficency: A calculated measurement of energy efficiency for both heating and cooling using the ratio of kW input to kW output.
    EER = Energy Efficiency Ratio
    COP = Coefficient of Performance
    AEER# = Annual Energy Efficiency Ratio
    ACOP# = Annual Coefficient of Performance
    #These include standby power in the rating calculation
  • Please note:
    Final outdoor unit selection will be affected by several different factors. The combination of rooms and their location, as well as operating use, will determine which of the proposed models you require. In many cases, an outdoor unit with a lower heating capacity may be adequate where not all indoor units are required to operate in maximum heating mode simultaneously. Or, if you are considering adding more indoor units in the future, in the interests of future-proofing, you may be best to select an outdoor unit capable of providing more capacity than you currently require.

Connectable Indoors

Connect multiple indoor units to a single outdoor unit.

This system gives you the freedom to select the indoor model best suited to each and every room in your home. Multi-Split Systems are designed to allow multiple indoor units of varying capacity and type to be connected to just one outdoor unit, enhancing exterior aesthetics by reducing the number of outdoor units required.

If more than one room requires heating and cooling, a Multi-Split system may be right for you. This system allows the indoor units chosen to reflect the specific needs of each room. For example, a whisper-quiet high wall could be selected for a bedroom, while a floor console could be used to replace a fireplace in the living room. The indoor units selected will be powered by just one outdoor unit, lowering the overall capital cost and increasing the energy efficiencies achieved.

Connectable Indoor Unit Types.

Every home is different, and with so many options to choose from it is important to consider each individual room’s requirements as part of the overall OmniCore Multi Room system.

Use the following to learn more about the different indoor unit types available, as well as controller options. This information can then be used to base your preferred selection of indoor units and control systems that best suit your home.

The Classic GE Series is our best-selling heat pump range ever! This is a testament to exceptional product quality, reliability and superior heating performance. And because of the extensive size range available – starting from 2.2kW to the large capacity 7.8kW, it means there is a perfect solution for every kind of room.
The AP Series that features New Zealand’s quietest heat pump ever*, sets a new standard in whisper quiet, year-round comfort with advanced features such as Dual Barrier Coating that maximises energy efficient performance and options for either built-in*1 or optional Wi-Fi Control. And the AP15-20 New Zealand's smallest high walls ever*2 – perfect for above doorways and small home offices.

* AP25 indoor sound level on lowest fan setting in Heating Mode.
*1 AP15-20 Wi-Fi Control optional only.
*2 Indoor unit total volume size of 0.034m3.
The Designer Series combines exceptional energy efficiency with award-winning aesthetics. The elegant slimline design is available in Glossy White, Matte Silver or Rich Black Diamond – so you can truly reflect your design personality.
The Black Diamond Series sets the new standard in personalised comfort and style. Available in three unique reflective colours; Red Diamond, White Diamond or Black Diamond. Packed with advanced features including Plasma Quad Plus Filtration, the 3D i-See Sensor for customised heating or cooling, and Dual Barrier Coating to maximise year-round energy efficient performance.
New Zealand’s quietest floor consoles* feature a contemporary slimline design and dramatically reduced depth. RapidHeat Floor Consoles are the perfect solution for unobtrusive heating at floor level. Advanced sensors with Intuitive Control Logic Technology offer unparalleled low temperature heating performance in the shortest amount of time, all while maintaining maximum energy efficiency. *MFZ-KW25/35 indoor sound level on lowest fan speed in Heating Mode.
The MLZ Series with its streamlined design, airflow control features, and quiet operation from just 26dBA, is ideal for small installation spaces where one-way air distribution is needed.
Compact and ultra quiet, our range of ceiling cassette systems are equipped with four-way airflow and cutting edge control. They offer you the flexibility to keep your wall and floor space free without compromising on comfort.
The PLA Cassettes set a new benchmark in space heating. Featuring cutting edge airflow and independent vane direction control, PLA Cassettes revolutionise flexibility, allowing you to keep your wall and floor space free without compromising on comfort.
A stylish, slimline indoor unit designed to provide comfort in large, open areas such as conference rooms or open plan offices – Mitsubishi Electric's range of Ceiling Suspended indoor units are designed to blend in seamlessly at ceiling height. With four speed settings and auto air-speed adjustment, the Ceiling Suspended PCA Series units are ideal for small and large areas alike.
Compact, whisper quiet and highly efficient, our ceiling concealed SEZ Series units fit easily and discreetly into rooms with lowered ceilings. Optional fresh air intake provides all round refreshing comfort.

OmniCore Multi Room Systems need to be specified by a Mitsubishi Electric Authorised Installer

Final selections should always be based on an in-home quote from a qualified Mitsubishi Electric Authorised Installer.


Downloads

Support