Browse products


PEFY-P VMA(L)-E

Ceiling concealed type - Medium static pressure type
A wide range of external static pressure and the slim 250mm-height body provide design flexibility for narrow ceiling spaces. The lineup consists of up to P140 with the same height.

Models

PEFY-P20VMA(L)-E4.TH

2.2kW / 2.5kW

PEFY-P25VMA(L)-E4.TH

2.8kW / 3.2kW

PEFY-P32VMA(L)-E4.TH

3.6kW / 4.0kW

PEFY-P40VMA(L)-E4.TH

4.5kW / 5.0kW

PEFY-P50VMA(L)-E4.TH

5.6kW / 6.3kW

PEFY-P63VMA(L)-E4.TH

7.1kW / 8.0kW

PEFY-P71VMA(L)-E4.TH

8.0kW / 9.0kW

PEFY-P80VMA(L)-E4.TH

9.0kW / 10.0kW

PEFY-P100VMA(L)-E4.TH

11.2kW / 12.5kW

PEFY-P125VMA(L)-E4.TH

14.0kW / 16.0kW

PEFY-P140VMA(L)-E4.TH

16.0kW / 18.0kW

Note: Above capacity ratings are all nominal rated.

Features

Compact design with a height of no more than 250 mm (all models)

Thin body design with a height of no more than 250 mm (all models) enables the installation in a ceiling with small cavity.

Demonstrates a maximum external static pressure of 150 Pa despite its compact design

Five-stage external static pressure settings provide flexibility for duct extension, branching, and air outlet configuration and are adjustable to meet different application conditions. Settings range to a maximum of 150 Pa.

Note: The new PEFY-P63VMA-E4.TH has a width of 900mm while the old PEFY-P63VMA-ER1.TH had a width of 1100mm.

Air inlet direction can be easily changed

By simply switching the closing board and air filter, the inlet layout can be changed from the rear inlet to the bottom inlet. (At factory shipment: Rear inlet)

Analogue input

Multi-stage airflow control is possible by connecting a third-party Damper System Controller to the analogue input.

Optional drain pump

The lineup consists of two types of models, with or without a built-in drain pump, for more flexibility in piping layout design.

PEFY-P VMA(L)-E