Browse products

23kW Zubadan Hot Water Heat Pump with Split Hydrobox

PUHZ-SHW230YKA2

The EHSE hydrobox is for larger homes in the form of underfloor, radiators and other hydronic units. You can also combine a large coil cylinder for domestic hot water. They are a highly adaptable solution for retrofit and new builds. For systems where a third party cylinder is to be installed, a three-way valve can be added to the system and connected to the FTC6 controller. This system comprises of the 23kW PUHZ-SHW230VHA Zubadan outdoor split unit, pre-plumbed EHSE-YM9ED hydrobox and FTC6 controller. Zubadan's rated heating capacity is maintained even in outdoor temperatures as low as -15°C, guaranteeing total home comfort when you need it most.

New

$ POA

Select a Size

PUHZ-SHW230 23kW Zubadan

Features
Specifications
Downloads
Support

Features

Specifications

PUHZ-SHW230YKA2R2 - 23.0kW Ecodan Split Air Source Hot Water Heat Pump


	Function: Hot Water Heating
	Type: Split Air Source Heat Pump
	Refrigerant Type: R410A
HEATING (A7/W35)*¹
	Capacity [kW]: 23.0
	Power Input [kW]: 6.31
	COP: 3.65
HEATING (A2/W35)*²
	Capacity [kW]: 23.0
	Power Input [kW]: 9.71
	COP: 2.37
COOLING (A35/W7)*3
	Capacity [kW]: 20.0
	Power Input [kW]: 9.01
	EER: 2.22
COOLING (A35/W18)*4
	Capacity [kW]: 20.0
	Power Input [kW]: 5.63
	EER: 3.55
OPERATING RANGE
	Heating Operation Ambient Temperature [°C DB]: -25 ~ +21
	Cooling Operation Ambient Temperature [°C DB]: +10 ~ +46
	DHW Operation Ambient Temperature [°C DB]: -25 ~ +35
OPERATING CHARACTERISTICS
	Sound Pressure Level at 1m [dBA]*¹: 59
	Flow Rate [L/min]: 28.7 - 65.9
ELECTRICAL DATA
	Power Supply: 400V / Three Phase / 50 Hz
	Maximum Current / Fuse Rating [A]: 20.0 / 25
GENERAL
	Unit Connections (Liquid / Gas) [mm]: 12.7 (1/2) / 25.4 (1) flared connections
	Min Pipe Length [m]: 2
	Max Pipe Length [m]: 80
	Max Height Difference [m]: 30
	Dimensions (WxDxH) [mm]: *1050 x 330+305 x 1338**
	Weight [kg]: 143
	Notes 1 Under normal heating conditions at outdoor temp: 7°CDB / 6°CDB, outlet water temp 35°C, inlet water temp 30°C as tested to BS EN14511. 2 Under normal heating conditions at outdoor temp: 2°CDB / 1°CDB, outlet water temp 35°C, inlet water temp 30°C as t

ERSE-YM9EC - Packaged Hydrobox for Reversible Split Units


	Liquid / Gas pipe (mm): 12.7 / 25.4
	Type: Hydrobox for Split Units
	Type: Hydrobox for Split Units
	Operating Ambient Temperature: 0 ~ +35°C (RH<80%)
	Operating Ambient Temperature: 0 ~ +35°C (RH<80%)
	Sound Pressure Level At 1m (dBA): 30
	Sound Pressure Level At 1m (dBA): 30
WATER DATA
WATER DATA
	Max Flow Rate (l/min): 61.5
	Liquid / Gas pipe (mm): 12.7 / 25.4
	Pump: Grundfos UP,MXL GEO 25-125 180PWM
	Max Flow Rate (l/min): 61.5
	Connection Size (mm): G1 - 1/2B
	Pump: Grundfos UP,MXL GEO 25-125 180PWM
	Primary Expansion Vessel (Litres): 10
	Connection Size (mm): G1 - 1/2B
	Charge Pressure (MPa (Bar)): 0.1 (1)
	Primary Expansion Vessel (Litres): 10
WATER SAFTEY DEVICES - Water Circuit
	Charge Pressure (MPa (Bar)): 0.1 (1)
	Control Thermistor (°C): 1 - 80
WATER SAFTEY DEVICES - Water Circuit
	Pressure Relief Valve (MPa (Bar)): 0.3 (3)
	Control Thermistor (°C): 1 - 80
	Flow Sensor (Minimum Flow 5L/min): Supplied
	Pressure Relief Valve (MPa (Bar)): 0.3 (3)
ELECTRICAL DATA - Control Board (Optionally Powered by Outdoor Unit)
	Flow Sensor (Minimum Flow 5L/min): Supplied
	Power Supply: 230V / Single Phase / 50 Hz
ELECTRICAL DATA - Control Board (Optionally Powered by Outdoor Unit)
	Breaker (A): 10
	Power Supply: 230V / Single Phase / 50 Hz
ELECTRICAL DATA - Booster Heat (Optionally Powered if Required)
	Breaker (A): 10
	Power Supply: 400V / Three Phase / 50 Hz
ELECTRICAL DATA - Booster Heat (Optionally Powered if Required)
	Maximum Current (A): 13
	Fuse Rating (A): 16
	Capacity (kW): 9
	Maximum Current (A): 13
	Capacity (kW): 9
	Power Supply: 400V / Three Phase / 50 Hz
GENERAL
	Fuse Rating (A): 16
	Dimensions (WxDxH, mm): 600 x 360 x 950
GENERAL
	Weight (Empty / Full) (kg): 63 / 73
	Dimensions (WxDxH, mm): 600 x 360 x 950
	Weight (Empty / Full) (kg): 63 / 73

· Nominal operating condition:
(A7/W35) – Outside air temperature (DB/WB): 7/6°C, Water temperature (inlet/outlet) 30/35°C.
(A35/W7) – Outside air temperature (DB/WB): 35/24°C, Water temperature (inlet/outlet) 12/7°C.

· Power Input: At distance of 1m from outdoor unit.

· Power input figures do NOT include pump input figures as pump input depends on local system configuration.

· Split type specifications are just examples of the case that the units are connected to a plate heat exchanger produced by Alfa Laval. Actual specifications depend on local system configuration. The specifications above are based on Alfa Laval ACH70-50H Heat Exchanger being used.

Downloads

PUHZ-SHW230YKA2R2

Brochure.pdf (3,195 KB)

ERSE-YM9EC

Operation Manual.pdf ()

Other

Support

Warranty

Mitsubishi Electric Ecodan Hot Water Heat Pumps come with a 5 Year Parts and Labour Warranty.

Warranty commences from the date the system is purchased and installed. The installer must also fill out and return a BDT commissioning form applicable to the original purchaser. The installer must also have completed the Ecodan training course. Equipment defects covered by this warranty will be repaired or replaced at the discretion of BDT without cost to the owner for parts or direct repair labour. A BDT authorised repair company shall carry out the repair or replacement during normal business hours.

Any Mitsubishi Electric Ecodan parts or equipment replaced under the warranty will be warranted in accordance with the provisions of this warranty for the remainder of the original warranty period or 12 months from the completion of the repair, whichever is the greater.

Except where inconsistent with the owner?s statutory rights and the rights given by this warranty, all other warranties and all liability of BDT for any loss or damage direct and consequential is expressly excluded.

For full details view warranty terms and conditions.pdf (125 KB)