Our GL42 High Wall Heat Pump features Next Generation High Efficiency Compressor Technology, developed and engineered specifically to use less power than ever before. Exceptional energy efficient heating and cooling and unbeatable whisper quiet operation makes the GL42 ideal for heating medium sized rooms.
Starting from barely a whisper, our GL42 allows you to feel the warmth, not hear it. The GL range starts from a hushed 19dBA indoor sound and contains New Zealand’s quietest heat pumps ever.
Combining efficient technology with unique energy saving features, our GL Series systems will contribute to reduced energy consumption in your home or office. Our i-save and Econo Cool Modes are included on all GL models. i-save Mode allows you to save temperature and fan speed combinations, returning to these at the touch of a button and Econo Cool provides maximum energy energy efficiency in Cooling Mode.
R32 is a refrigerant with just one-third the global warming potential of R410A and has zero ozone depletion potential. R32 offers increased energy efficiency, and is said to be the next generation of refrigerants
Low Stand By Power
Boasting 1W standby power, a reduction of around 90% on previous standby power consumption
Blue Fin Condenser
The heat exchanger of the outdoor has been treated with blue fin anti-corrosion treatment slowing the corrosion process caused by salt, sulphur etc in the air especially in coastal/high sulphur areas.
7-Day Programmable Hand Held Controller
Advanced infrared controller allowing the programming of up to four settings (per 24 hour period) including start/stop operation and temperature settings over a 7 day period. This eliminates the need to reset the timer daily. You can program your heat pump to start up before you wake or return home and regulate your energy usage without compromising on comfort.
Optional Wi-Fi Control Upgrade
With the addition of award-winning Mitsubishi Electric Wi-Fi Control, you can control and monitor your heat pump from absolutely anywhere via your smartphone, tablet or online account.
MA, M-NET and Contact Terminal Interface. Has remote on/off, prohibit/permit control and run/error outputs - all outputs require an independent external 12VDC power supply. Used to connect PAR-21 / PAR-31 to; MSZ-GE/FB/EF, MFZ-KA/FB & SLZ-KA~VAL indoor units or a Central / Schedule Controller to each indoor unit connected to a M or S-Series outdoor unit.
The award-winning MAC-568IF-E Wi-Fi Interface connects discreetly to your heat pump’s control board and should only be installed by an authorised installer. The MAC-568IF-E Wi-Fi Interface is available on Mitsubishi Electric High Wall, Floor Mounted, and Ducted Heat Pumps, and can either be purchased as an optional upgrade at time of purchase, or retrofitted to an existing Mitsubishi Electric model.