i-BX-N Fully Packaged Hot Water Heat Pump

i-BX-N 020T

Mitsubishi Electric Climaveneta has used the latest advancements in hot water heat pump technology to offer the i-BX-N fully packaged air to water heat pump. The highly efficient, low noise system fits seamlessly into both domestic and light commercial environments offering both hot water and space heating and cooling. The i-BX-N Range is low maintenance and easy to install, with minimal connections to make.

Heating Capacity21.7 kW
Select a Size

Features

Key Features

  • Fully packaged unit including all control and hydronic components
  • Low maintenance and quiet operation
  • Capacity ranging from 4.6kW to 38.0kW
  • Temperature control for up to 2 heating zones and domestic hot water
  • Single phase and 3 phase options

Application

  • Space heating
  • Potable hot water
  • Potable hot water and space heating
  • Suitable for the vast majority of domestic and light commercial applications

Integrated Hydronic Unit

The i-BX-N Range of Packaged Air-to-Water Heat Pumps come standard with a full suit of hydronic components built-in, simplifying the install process. The i-BX-N comes standard with the following:

  • BLDC Pump for guaranteed low consumption and high efficiency
  • Water flow switch for system freeze protection
  • 600KPa pressure relief valve
  • Anti-freeze electric heater
  • Expansion vessel
  • Air-release Valve
  • Y-Strainer, supplied loose

Mitsubishi Electric Quality

Synonymous with quality reliability and efficiency, Mitsubishi Electric inverter compressors are installed in the i-BX-N Range. Mounted on noise damping rubber mounts and surrounded in sound absorbing material, the i-BX-N has been designed with reduced noise levels in mind. This sound reducing philosophy has been extended to the control side of the i-BX-N Range, optimised with Climaveneta’s advanced Nadisystems, the Compressor frequency and unit fan speed is modulated further reducing any noise.

Easy Install

The i-BX-N Packaged Air-to-Water Hydronic Heat Pumps have been refined by Climaveneta to provide a simple, yet flexible install process. With all the hydronic and control systems on board, pre wired and pre plumed, installation involves simply connecting the unit to the heating load and filling with water.

System Adaptability

With the onboard flexible controls, the i-BX-N can be used in multiple configurations including space heating, domestic hot water or both.

Operating Limits

With a wide range of operating limits, the i-BX-N unit is perfect for all applications and provided heating and cooling for year-round comfort.

Specifications

HEATING (A7/W35)*¹
Capacity [kW]: 21.7
Power Input [kW]: 6.90
COP: 3.14
HEATING (A7/W35)*2
Capacity [kW]: 21.7
COP: 3.16
COOLING (A35/W7)*3
Capacity [kW]: 18.7
Power Input [kW]: 7.0
EER: 2.67
COOLING (A35/W7)*4
Capacity [kW]: 18.7
EER: 2.70
OPERATING RANGE
Heating Operation Ambient Temperature [°C DB]: -20 to 45
Cooling Operation Ambient Temperature [°C DB]: 5 to 45
Heating Flow Temperature [°C]: 25 to 60
Cooling Flow Temperature [°C]*5: -8 to 18
HYDRONIC DATA
Water Pipe Size: 1"1/4 BSP Parallel Thread. ISO 228/1
Safety Valve [MPa (Bar)]: 0.6 (6)
Primary Pump: Yonos Para HF /10
Expansion Vessel [L]: 5
Precharge Pressure [MPa (Bar)]: 0.1 (1)
OPERATING CHARACTERISTICS
Sound Pressure Level at 1m [dBA]*¹: 59
Flow Rate [L/min]: 33 - 94.2
ELECTRICAL DATA
Power supply: 400V / Three Phase / 50 Hz
Maximum Current / Fuse Rating [A]: 20
GENERAL
Dimensions (WxDxH) [mm]: 1450 x 550 x 1200
Weight [kg]: 205
Notes

*1 Under normal heating conditions at outdoor temp: 7°CDB / 6°CDB, outlet water temp 45°C, inlet water temp 40°C
*2 Under normal heating conditions at outdoor temp: 7°CDB / 6°CDB, outlet water temp 45°C, inlet water temp 40°C as tested to BS EN14511.
*3

Downloads

Support

Warranty

  • Mitsubishi Electric Climaveneta Hot Water Heat Pumps come with a 5 Year Parts and Labour Warranty.

    Warranty commences from the date the system is purchased and installed. The installer must also fill out and return a BDT commissioning form applicable to the original purchaser. The installer must also have completed the Climaveneta training course. Equipment defects covered by this warranty will be repaired or replaced at the discretion of BDT without cost to the owner for parts or direct repair labour. A BDT authorised repair company shall carry out the repair or replacement during normal business hours.

    Any Mitsubishi Electric Climaveneta parts or equipment replaced under the warranty will be warranted in accordance with the provisions of this warranty for the remainder of the original warranty period or 12 months from the completion of the repair, whichever is the greater.

    Except where inconsistent with the owner’s statutory rights and the rights given by this warranty, all other warranties and all liability of BDT for any loss or damage direct and consequential is expressly excluded.

Other

Mitsubishi Electric Climaveneta Air-to-Water Heat Pumps