Adaptors, Sensors & Power Packs

Advanced interface technologies of digital, analogue and pulse input control modules for connecting to centralised and web central controllers. Room sensors to allow you flexibility to tailor your heating and cooling solutions.

PAC-YG66
The PAC-YG66MCA interface is a digital input and output control module, it provides On/Off control and Fault monitoring via volt free contacts (VFC), the interface allows control and monitoring of two third party items such as fans & lighting and can extend to six items with the use of the PAC-YG10HA-A Adaptor.
PAC-YG63
Analogue Input Control module. Provides an analogue input for: temperature & humidity sensors, etc. Connects to a Centralised and Web Central Controller.
PAC-YG60
Pulse Input Control module. Provides an analogue input for: watt hour meter with pulse transmitter, etc. Connects to a Centralised and Web Central Controller.
PAC-YG10HA-E
Input/Output Adapter
PAC-YG10HA-E
Input/Output Adapter. Provides control for fresh air fan start-up and emergency fire stop. Connects to a centralised and web controller.
PAC-SE55RA-E
3-Pin Timer Adapter
PAC-SE55RA-E
3-Pin Timer Adapter. Plugs into the Indoor Unit PCB. Provides On/Off Input; Low Voltage Pulse or Level Contact Start and Stop signal to each indoor unit. For connection to an External Building Time Clock* etc. (*Supplied by Electrician)
PAC-SE41TS-E
Remote Sensor
PAC-SE41TS-E
Remote Sensor. This is fitted in place of the existing Return Air Sensor to provide Room Sensing. Flush mounted sensor housing.
PAC-SC51KUA
Power Pack
PAC-SC51KUA-J
PAC-SC51KUA-J Power Pack. This unit supplies DC power to controller (AG-150A).
Adaptors, Sensors & Power Packs