Browse heat pumps

FTC5 Packaged Cylinder for Reversible Split Units

ERST20C-VM2C

The Packaged Cylinder offers a highly adaptable heating or cooling solution combined with DHW for retrofit or new builds. Designed specifically by Mitsubishi Electric to integrate with the Ecodan Split Air Source Heat Pump Range, the Cylinder provides high performance and fast heat up times through the use of Plate Heat Exchanger Technology and intelligent control. Fast commissioning via an SD card and energy monitoring functions are included.

Specifications

· Type: FTC5 Packaged Cylinder for Split Units
WATER DATA
WATER SAFTEY DEVICES - Water Circuit
WATER SAFTEY DEVICES - DHW Cylinder
ELECTRICAL DATA - Control Board (Optionally Powered by Outdoor Unit)
· Power Supply: 230-240V / Single Phase / 50 Hz
ELECTRICAL DATA - Booster Heat
· Power Supply: 230-240V / Single Phase / 50 Hz
GENERAL
· Dimensions (WxDxH, mm): 595 x 680 x 1600 · Weight (Empty / Full) (kg): 110 / 320

·  Rating Conditions (AS / NZS 3823):
   Cooling – Indoor: 27°C DB, 19°C WB. Outdoor: 35°C DB.     Heating – Indoor: 20°C DB, Outdoor: 7°C DB, 6°C WB.

·  Sensible Cooling Conditions, Indoor: 27°C DB, 20°C WB. Outdoor: 35°C DB.

·  Dry function will not work when the room temperature is below 13°C.

·  Colour: Heat pump units shown may not be colour accurate, please ensure you view an actual unit for colour matching.

·  Maximum length is inclusive of height differential. i.e. (20m length/12m high) means the pipe can be 12m high and 8m across for a total length of 20m.

·  Measure of Energy Efficency: A calculated measurement of energy efficiency for both heating and cooling using the ratio of kW input to kW output.
   EER = Energy Efficiency Ratio
   COP = Coefficient of Performance
   AEER# = Annual Energy Efficiency Ratio
   ACOP# = Annual Coefficient of Performance
   #These include standby power in the rating calculation

·  Star Ratings based on the Seasonal Energy Rating standard for New Zealand - cold zone [GEMS 2019]

Downloads

Support