Browse heat pumps

4 Zone Base Kit

4 Zone Base + MAC-588IF-E

Take full control of your home’s comfort with the ZoneIQ 4 Zone Base Kit. Designed to integrate seamlessly with Mitsubishi Electric ducted heat pump systems, this intelligent solution allows you to independently control up to four zones, delivering precise temperature management where and when you need it most.
Includes: PAC-ZC04L240C-A (4-Zone Linear Interface), PAR-ZM01A-A (Main Remote Control), MAC-588IF-E (Wi-Fi), PAR-ZR01R-A (Wireless Receiver) **Additional Zone Remote Controllers and/or Sensors are required for system operation and must be selected separately to the Base Kit.

Select a Size

Features

4 ZoneIQ

Configure up to 4 zones with the PAC-ZC04L240C-A. Both interface options offer a common or spill zone configuration and control via linear damper motors, suitable for a wide range of home layouts. The Interfaces include an onboard 24 Vac transformer, eliminating the need for a third-party transformer.

Flexible Zone Configuration

Each additional zone can be fitted with either a wireless zone remote controller or a room sensor (sold separately, not included with the Base Kit). The system supports a mix of both, allowing you to customise control and sensing based on how each space is used.

Room-by-Room Control

Allows you to control up to 4 individual zones throughout your home, utilising 0.5°C increments, which allows each space to be set to the exact temperature you prefer. It also enables manual control of the airflow to the room, allowing for complete comfort control. Plus, with the Wi-Fi App you can adjust every zone from wherever you are.

Adaptive Temperature Control

The Zone Controller adapts to temperature changes every few minutes and automatically adjusts the airflow into each room with the use of a Mitsubishi Electric temperature sensor. The result? Every zone stays closer to your set temperature, with fewer fluctuations – so your living spaces feel consistently comfortable.

Aesthetic Controls

Designed for modern living, the main controller is a sleek black high-resolution touchscreen featuring intuitive and easy to use menus. It not only makes it easy to adjust and control your comfort, it also blends seamlessly into your home interiors.

Wi-Fi Zone Control

With the Wi-Fi Control App, there’s no need to manage your ducted system from the wall-mounted master controller. Whether you’re relaxing at home, working late or away on holiday, the intuitive app interface lets you manage your system room-by-room with confidence from wherever you are.
All zones are displayed on a single screen, making it easy to view temperatures and adjust settings across your entire home.

Weekly Schedule

Enjoy more energy savings by programming your Zone Controller to work only when you need it with the weekly schedule function. The schedule is easily disabled for further savings when you are on away on business or holiday.

Smart Notifications

Your smart zone controller keeps you informed with handy alerts, reminding you when it’s time to clean or replace the air filter, change the batteries in wireless sensors, or schedule a service. These notifications help ensure your system runs efficiently and keeps your home comfortable year-round.

Dry Mode Interlock

Mode Interlock provides active humidity control to improve indoor comfort, particularly during mild, humid conditions. When the system is set to “Dry” mode, it monitors humidity levels in each zone. It automatically controls dehumidification to reduce excess moisture, helping spaces feel more comfortable without unnecessary cooling.
Humidity levels are supplied by the Wireless Temperature Sensor (PAR-ZR01S-A) or Wireless Zone Remote Controller (PAR-ZR01AW/B-A), which detect both temperature and humidity within the conditioned space. Users can set a target humidity between 40% and 70% in 5% increments, allowing the system to start and stop dehumidification as needed to maintain the selected level. This provides consistent humidity control across the home while supporting stable, everyday comfort.

Retrofit friendly

The Zone Controller can handle a range of different third-party zone dampers on a single system, meaning your existing equipment (if working and in good condition) may not need to be replaced when retrofitting or expanding.*

*Subject to compatibility of your existing zone dampers.

Upgrade Existing Systems

Designed for easy upgrades, the zone controller is compatible with selected older Mitsubishi Electric ducted systems. Contact your local Mitsubishi Electric installer for compatibility details.

Black Zone Remote Controller (Sold Separately)

Monitors room temperature and humidity to support accurate zone control without user interaction. Ideal for spaces where automatic sensing is preferred. Not included with the Base Kit and must be selected based on your system configuration.

View

White Zone Remote Controller (Sold Separately)

Monitors room temperature and humidity to support accurate zone control without user interaction. Ideal for spaces where automatic sensing is preferred. Not included with the Base Kit and must be selected based on your system configuration.

View

Room Sensor (Sold Separately)

Monitors room temperature and humidity to support accurate zone control without user interaction. Ideal for spaces where automatic sensing is preferred. Not included with the Base Kit and must be selected based on your system configuration.

View

Features:

Specifications

4 Zone Base + MAC-588IF-E // 4 Zone Base Kit

· Dimensions (WxDxH, mm): 336 x 69 x 278 · Weight: 2.8 kg
· Allowable ambient temperature: 0 - 60°C · Allowable ambient humidity: 80% RH or less

PAR-ZM01A-A - PAR-ZM01A-A Main/Sub Remote Controller

· Dimensions (WxDxH, mm): 378 x 69 x 278 · Weight: 0.15 kg

Technical Note for: 4 Zone Base + MAC-588IF-E
*Additional Zone Remote Controllers and/or Sensors are required for system operation and must be selected separately.

·  Rating Conditions (AS / NZS 3823):
   Cooling – Indoor: 27°C DB, 19°C WB. Outdoor: 35°C DB.     Heating – Indoor: 20°C DB, Outdoor: 7°C DB, 6°C WB.

·  Sensible Cooling Conditions, Indoor: 27°C DB, 20°C WB. Outdoor: 35°C DB.

·  Dry function will not work when the room temperature is below 13°C.

·  Colour: Heat pump units shown may not be colour accurate, please ensure you view an actual unit for colour matching.

·  Maximum length is inclusive of height differential. i.e. (20m length/12m high) means the pipe can be 12m high and 8m across for a total length of 20m.

·  Measure of Energy Efficency: A calculated measurement of energy efficiency for both heating and cooling using the ratio of kW input to kW output.
   EER = Energy Efficiency Ratio
   COP = Coefficient of Performance
   AEER# = Annual Energy Efficiency Ratio
   ACOP# = Annual Coefficient of Performance
   #These include standby power in the rating calculation

·  Star Ratings based on the Seasonal Energy Rating standard for New Zealand - cold zone [GEMS 2019]

Downloads

Support

ZoneIQ Ducted Zone Controller